 |
Trade
Digital Design Solutions
Online AIA, ASID & NKBA CEU Courses
Dealer & Sales Rep Programs
Resources
Design Services Program | Mega Homes
|
|
About White River Design Services
We provide a wide range of millwork design services (preliminary sketches & elevations , 3D drawings and Build-ups in CAD) for residential and commercial projects, ranging from 25,000 sq. ft. interior projects to single rooms and renovations. Our staff of highly skilled Millwork Designers have more than 100 years of combined experience in the specification of traditional millwork. We will work with your Architect or Designer from initial concepts, build-ups, to full estimating. We take pride in our ability to take your ideas and transform them into an interior of your dreams.
How the Program Works — What to Expect — The Cost
1. Introduction
Contact Mega Home Specialist, Ben Johnson at 1.800.558.0119 ext 112, to discuss your project and schedule an Initial Jobsite Consultation with one of our Millwork Designers.
2. Site Assessment and Initial Design
During the jobsite visit, our Designer will take photos of each room to create some initial concepts and ideas for the homeowner or contractor to review. You should plan on 1/2 to 1 1/2 days for this meeting, depending on the scope of the job and services needed.
|
|
3. Preliminary Design Ideas and Confirmation
We will produce sketches for a visual picture of our millwork and moulding ideas. This may include but is not limited to elevations, sketches and 3D drawings if necessary. Once you are satisfied with the drawings, we will begin to create the technical CAD drawings.
4. Measure and Refine
We will need accurate measurements to clarify the details for each room. After measurements are completed, build-ups in CAD will be created for your contractor.
5. Moulding and Millwork Proposal
The Client can have their contractor do the take-off and estimate cost. Upon request, White River can provide a material take off and estimate, for a fee.
Expected Costs and Fees
1. Hourly Rate for All Design Services & Travel Time. Rate is based on project scope
2. Average investment for Initial Site Consultation -is $2,000- $3,000.00, which includes airfare, travel time, lodging, meals and jobsite time.
3. Design Services are pre-paid and based on requested services.
